Tel: 01482 868321

Sales enquiries : sales@hodgsonsealants.com
Technical enquiries : technicalservices@hodgsonsealants.com

Flexiseal

DESCRIPTION

FlexiSeal is a neutral cure, low modulus, solvent-free, one part, moisture cure, multipurpose sealant and adhesive based on Hodgson Hybrid Polymer Technology with very high strength and superior extension.

Suitable for many substrates including; unprimed metals, aluminium, steel, composite panels, wood, glass, plastics, concrete, mortar, plaster, epoxy and polyester coated panels, PVCu, polycarbonate, PU, stainless steel, anodised aluminium, copper, zinc, lead, finished wood and polystyrene.

For factory, on-site or remedial applications. Sealing of construction joints.

KEY FEATURES

  • Permanently flexible
  • Solvent & Isocyanate free
  • Gunnable at +5°C to +40°C
  • Does not contain any Phthalates or other harmful plasticisers
  • Non corrosive
  • Excellent primerless adhesion to most substrates
  • Weatherable and UV stable
  • High strength
  • Low odour
  • High movement capacity
  • Extended open time, for tooling
  • Cures tack free and highly elastic
  • Fast curing
  • Excellent storage stability
  • Highly resistant to substances such as mineral oils and mild solvents, acids and alkalis
  • Good tooling properties

PROPERTIES

Application temperature range: + 5o°C to + 40°C

Shelf life: 18 months

Skinning time: 15-30 minutes

Working time: 15-30 minutes

INSTRUCTIONS

Joint design: Please consult the Technical Information Sheet entitled ‘Joint design for cartridge-based products’ prior to application.

Surface preparation: All surfaces must be clean, dry and free from frost, grease and loose materials. Apply primer if required. Most substrates only require priming if testing indicates it is needed. Apply using a skeleton gun into the joint ensuring good contact with surfaces. In situations where an especially neat finish is required, use masking tape to cover the face edges of the joint and remove immediately once tooling has been completed.

Tooling: Tool immediately after application