Flexibond

A butyl security glazing tape that gives protection against moisture. Tested to BS 6375 (weather tightness) and BS 7950 (security) as part of the D4 glazing system.

Flexibond Security Glazing Strip is a revolutionary advance in glazing sealant materials. Designed for use when installing double glazed units into windows and doors, it incorporates the very latest in rubber polymer technology and does not require a silicone capping. Tested in accordance with BS6375 it provides theultimate in protection against the ingress of moisture in high exposure environments and with outstanding adhesion to glass and timber, it also fully meets the requirements of BS7950:1997.

APPLICATIONS

Installing double glazed units and laminated glass into timber and steel windows and doors. Used in drained and ventilated systems.

• Superior load bearing characteristics – tested to wind loads up to 2400Pa
• Suitable for Secured by Design Schemes when used in the D4 Glazing System
• Suitable for both non-drained and drained and ventilated timber frames
• Can be overcoated immediately with solvent/water borne paints and stains
• Quick to apply
• Excellent finish
• Eliminates need for distance pieces. Does not require silicone capping
• Enhanced security
• Service life in excess of 20 years depending on conditions
• No primers required

PROPERTIES

Application temperature range: +5ºC to +30ºC Shelf life: 24 months when stored flat in original packaging in cool, dry conditions.

INSTRUCTIONS

Surface preparation: All surfaces should be clean, dry and free from frost, grease and loose materials.

Application: Apply direct from the reel onto one surface and press sufficiently along its whole length to achieve good initial adhesion. Remove backing paper and offer other surface to the sealant and push firmly to seal across the joint.